Notes for installation on a Virtual Machine

• If you are using VirtualBox, make sure you have the Enable PAE/NX option checked. The location of the checkbox depends on the VirtualBox version, but it should be in the "System" or "General" properties.

• Only if you are installing eBox 1.2 (not needed for 1.3), make sure to unmount the .iso file right after the first stage of the installation is finished. Mount it again when you are asked for during the second stage. This seems to be needed with VirtualBox and VMWare, but it may also happen with another virtualization tools.

• If the machine has limited resources such as less than 1Gb of RAM, please not install all of the eBox modules, but select only the modules that you really need. Remember you can add any other module after the installation, either using the Software Management menu in the eBox interface or the apt-get install command.